Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
Automated Signaling's ASRB1 relay board is typically used to provide remote / higher current capability contacts using a smaller control voltage and current on its' input.
The ASRB1 can be used in nearly any application requiring generic use of a relay. With low-voltage DC control, the ASRB1 can be used to control remote lighting, cameras
Automated Signaling's ASRB1 relay board is typically used to provide remote / higher current capability contacts using a smaller control voltage and current on its' input.
The ASRB1 can be used in nearly any application requiring generic use of a relay. With low-voltage DC control, the ASRB1 can be used to control remote lighting, cameras, timers, solenoids or many other remote switching needs, including coil input control of even a higher current relay for fan or pump motors.
It can be mounted on almost any surface and is very easy to use. The coil input can use 6,12 or 24V with a typical 25ma draw. The ASRB1 is an excellent choice for remote control of almost any device driven by up to 2 amps of current.
Applications:
* Remote lighting control
* Remote camera control
* Long-wire signal boost
* Robotics
* Hobby
Specifications:
* 6, 12, or 24 VDC operating voltage *
* 25ma Coil operating current
* DPDT contacts with terminal strip terminations
* Max contact switching current:2 amps
* Max contact switching voltage: 30VDC or 120 VAC
* Fire resistant, voltage insulated case, 2"x 2" size
* (For 12 V cut the red jumper for 24 V cut the red and black jumper)
Automated Signaling's ASRB-1x5 is a Relay Board has a 5 amp contact rating. The ASRB-1x5 uses 12 or 24 VDC coil control. Use this model ASRB when applications demand more current than can be controlled by the ASRB-1.
The ASRB-1x5 can be used in nearly any application requiring generic use of a relay. With low-voltage DC control, the ASRB-
Automated Signaling's ASRB-1x5 is a Relay Board has a 5 amp contact rating. The ASRB-1x5 uses 12 or 24 VDC coil control. Use this model ASRB when applications demand more current than can be controlled by the ASRB-1.
The ASRB-1x5 can be used in nearly any application requiring generic use of a relay. With low-voltage DC control, the ASRB-1x5 can be used to control remote lighting, cameras, timers, solenoids or many other remote switching needs, including coil input control of even a higher current relay for fan or pump motors.
It can be mounted on almost any surface and is very easy to use. The coil input can use 12 or 24V with a typical 40 ma draw. The ASRB-1x5 is an excellent choice for remote control contacts of almost any device driven by up to 5 amps of current.
Applications:
* Remote camera control
* Long-wire signal boost
* Light and Horn Annunciation
* Robotics
* Hobby
* Science
* Education
* Small Motor Control
* Electrical Fence Control
Specifications:
* 12, or 24 VDC operating voltage *
* 40 ma Coil operating current
* DPDT contacts with terminal strip terminations
* Max contact switching current:5 amps
* Max contact switching voltage: 30VDC or 120 VAC
* Fire resistant, voltage insulated case, 2"x 2" size
* (For 24 V cut the red jumper)
Copyright © 2024 Automated Signaling - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.